Friday, January 16, 2009

Dress Enough for an Engineer


So these are the latest Allan socks. Actually, these pictures are so late going up, that there is another pair of Allan socks on the needles. The pair on the needles is going to take a long hiatus though, as once I have those needles free I am planning on starting the bridal attendants' socks. Alex, I love you so very much for picking heavy weight yarn. That makes the whole project easy.

Back to the sock at hand - it's in Wildfoote, I knit it on 2.5mm needles at a tension of 16.5 stitches /5cm. (Yes, I know that's 8.25 spi, but in the interests of allowing people who don't like math to knit too, I have decided to eliminate inches from my knitting). I definitely recommend the yarn. It's very nice to knit, and so far seems to be wearing well, not that you can tell before a couple of years have passed. I think it's a shade thicker than, for example, Regia, so my tension isn't actually that loose, it's a very nice fabric. Here's the heel and cable a bit closer up.

The cable is a 2x2, crossed every 4 rows, and the heel accomadates Allan's narrow ankles by being a band heel, and the overall size of his feet by having an 8 stitch band. I believe there is a 2 stitch "guesset" to decrease from the 72 stitches I had in the cuff to the 68 stitches in the foot. The difference is because of the cable.

Sorry about the detail picture, but my camera turns the flash off if I set it to take close-ups. And it's just a point-and-shoot, so even if I did know how to take pictures properly, it wouldn't do me any good, because the camera wouldn't let me.

2 comments:

Unknown said...

Being plain colours really shows your good knitting. These are like the 'plain' pairs I have to knit my John.

Christine said...

Thank you for your lovely comments Colin.